Click logo for Schwank home page

 

     
 
Tube Heaters
STR-JZ
   
STR-JZ
            Click to enlarge
   
  STR-JZ Series
Residential Garage / Shop Heater

The Schwank STR-JZ Infrared Shop Heater sets the comfort and safety standards for hobbyists, and delivers heating cost savings of up to 50% versus forced air systems. The STR-JZ couples our patented ceramic burner head with an efficient direct-drive blower located in line behind the burner. This system ensures a homogeneous gas-air mixture for optimum combustion efficiency and a long narrow flame, which is ideal for tube firing. Outside combustion air is ducted directly to the burner for safe sealed combustion in your shop.

The power burner forces heat down a special steel tube with emissive coating on the outside. The heated tube radiates comfortable high efficiency infrared heat energy. The unique Schwank Focus Shield Reflector mounted over the tube directs the infrared rays (like the rays of the sun) to the floor, equipment and the people below.

Depending on burner input rating, the technique provides low intensity radiant heat over a variety of tube lengths and configurations.

Schwank is proud to provide this innovative tube heater design which safely delivers the most infrared heat and comfort to your shop at the lowest fuel cost.

Long Flame

Other infrared tube heaters produce a 2' to 3' flame.

Schwank’s unique ceramic burner produces a 14' flame.

As a result Schwank infrared tube heaters deliver more uniform heat and comfort, and are far more infrared energy
efficient than competing products.

Shown above is the actual flame produced by a
Schwank 155,000 Btuh burner.


   

Click to enlarge picture
STR-JZ

STR-JZ Features Benefits
45,000 to 60,000 Btuh Input;
10 to 30 foot system length
  • Match heating needs and shop dimensions
Ceramic Burner Head
  • Homogenous fuel mixture
  • Clean efficient combustion
  • Long flame for more uniform heat output
  • Whisper Quiet operation
Focus Shield Reflector with capped ends extends below bottom of tube
  • Entraps convection heat – converts to infrared heat output
  • Permits lower clearances above the heater
Webbed hanger system for tubes / reflectors
  • Allows free-flow of entrapped convection heat along heater length
  • More uniform heat output
Factory supplied 24V thermostat control
  • Convenient installation and comfort control
Burner Status Lights
  • Confirm operation
Combustion air intake collar on blower
  • Safe sealed combustion
Hinged, fold-down burner housing
  • Simple service access from end and sides.
Horizontal to 45° orientation
  • Direct heat where needed
Best warranty: 10 years on tubes and ceramic burner cup; 3 years on parts
  • Protects your investment
Specifications and Literature available in Published Info area
     
     
  Home    Company     Products     Heating Solutions     At Your Service    
Published Info     Quote/Design     Contact Us     Site Map